Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Drop

Dimension Road Handlebar
$33.99
Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.
Bontrager Race Lite VR Oversized Road Factory Overstock Bar
$36.00 $89.99 60% Off
Great bar shape allows multiple hand positions in and out of the drops. Hammer in the drops Race Lite is shot-peened and anodized for the ultimate defense against fatigue and constructed of custom-butted 7075 aluminum to achieve the lowest possible weight without sacrificing strength and durability. - Custom-butted, 7075-T6 alloy construction - Double cable groove for shifter and brake cables - Compatible with Bontrager Aero Clip-on Handlebars - Laser-etched brake lever position lines for spot-on control setup - Go green and save green – Zero packaging means zero waste and zero extra cost
Ritchey Comp Curve Road Handlebar
$39.95
- Short reach, shallow drop with a smooth, double-radius drop section - Center section is aero bar compatible - No-slip grit at stem and brake lever mounting surfaces - Double Butted 6061 Alloy - Measured Center-to-Center where the levers mount - 31.8mm O/S center section - Drop/Reach: 128/73mm - 300g (42cm)
Dimension Short Drop Handlebar
$39.99
Dimension short drop road handlebars are available with a 26.0mm clamp diameter and sport single-groove cable routing. - Made from 6061 Aluminum - Single-groove cable routing - Accessory Mount Diameter (mm): 26.0 - Bar Clamp Diameter (mm): 26.0 - Bar Drop (mm): 128 - Bar Reach (mm): 80 - Bar Top Style: Round - Clip-on Compatible: No - Drop Bend Style: Compact - Material: Aluminum - Weight: 340g (40cm) - Width Measurement: Center
Bontrager RL IsoZone OS VR-CF Road Factory Overstock Bar
$40.00 $99.99 60% Off
- Custom-butted, 6066-T6 alloy construction - Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions - Compatible with clip-on aero bars - Flat front for dual cable routing - Laser-etched brake lever position lines for spot-on control setup - Go green and save green – Zero packaging means zero waste and zero extra cost
Dimension Flat Top Shallow Reach Handlebar
$44.99
These are 31.8mm flat top road drop bars with very shallow reach. - Double-butted and tapered 6061-T6 aluminum bars - 120mm wide center section with 31.8mm diameter - Flat top bar with cable grooves - Accessory Mount Diameter (mm): 31.8 - Bar Clamp Diameter (mm): 31.8 - Bar Drop (mm): 125 - Bar Reach (mm): 70 - Bar Top Style: Flat - Clip-on Compatible: Yes - Color: Black - Defined Color: Black - Drop Bend Style: Compact - Material: Aluminum - Weight: 266g - Width: 38cm - Width Measurement: Center
FSA Omega Compact Road Handlebar
$44.99 - $59.99
Upgrade your bike with FSA's Omega Road Handlebar. The double-butted, tapered and shot-peened aluminum construction makes this bar light and durable. It also features an ergonomic curve for comfort and a variety of hand positions. Plus, the Omega even sports a groove that makes cable routing easy.
Ritchey Comp EvoMax
$49.95
Twelve degree flared drop means forearm clearance when in the drops and greater leverage than a non-flared bar. Ritchey's Comp EvoMax is the ideal shape for on- or off-road builds from a mixed-terrain road bike to cross to mountain! - Evo Curve shaped top with 12-degree flare of the drops - Double butted 6061 alloy - Drop/Reach: 120/73mm - 12 degree drop flare - 4.7 degree sweep, 0 degree flare - BB Black finish - 292g (42cm)
Ritchey Comp Evocurve Handlebar
$49.95
Ritchey Comp EvoCurve road bar with double-radius bend, 5-degree sweep, short shallow reach and drop. - Measured center-to-center at the hood - Short shallow double-radius bend - Compatible with clip-on bars - Double-butted 6061 alloy - 31.8 mm Bar Clamp Diameter - 128 mm Bar Drop - 83 mm Bar Reach - Compact Drop Bend - Material: Aluminum
Ritchey Comp VentureMax Handlebar
$49.95
The Ritchey Comp VentureMax Road Handlebar is just as applicable on a cross country tour as on cross country singletrack. Intended to ride wider than typical drop bars, the VentureMax is measured at the initial bend rather than at the hood. While it boasts a number of attributes including multiple hand positions, it's the return of the Bio-bend in the drop that adds to the signature look and feel of this bar. - Double-butted 6061 alloy - 6-degree backsweep / 24-degree flare - Bio-ergo drop bend - 38-44cm widths - 102mm drop - 76mm reach
Ritchey Neoclassic Road Handlebar
$49.95
• The NeoClassic features the traditional round drops that many Tour de France and Classics champions prefer, now updated with a shorter reach and shallower drop • Center section is aero bar compatible • Offers more hand positions in the drops than anatomical and ergo bends • The preferred bend style of countless pro riders • 301g (40cm)
Bontrager Comp VR-C Road Handlebar
$49.99
The Bontrager Comp VR-C offers a compact design and slightly shallower drop while still retaining the classic Variable Radius shape, providing quick, comfortable transitions from the hoods to the drops for sprints. - Custom-butted, 6061-T6 alloy construction - Variable Radius Compact (VR-C) design allows longer reach and drop - Compatible with clip-on aero bars - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup
Bontrager Comp VR-S Road Bar
$49.99
The Bontrager Comp VR-S road bar offers a shorter drop and reach, while still retaining the classic Variable Radius shape, providing quick, comfortable transitions from the hoods to the drops for sprints. - Custom-butted, 6061-T6 alloy construction - Variable Radius-Short (VR-S) bar shape features a shallow drop with shorter reach, optimized for riders who prefer a less aggressive posture - Compatible with clip-on aero bars - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup
Easton EA50
$49.99
Your rock-steady set and forget road bar. Only a few grams heavier than the EA70 and sporting the same MCD drop technology as our top of the line road bars. These budget friendly bars will leave you comfortable in the saddle all day without breaking the bank. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 315g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Reach: 80mm - Drop: 125mm - Materials: EA50 alloy
Easton EA50 AX
$49.99
Easton’s new AX series now includes our budget friendly EA50 AX flared drop bar. With the same MCD drop technology as our top of the line road bars, flared to 16 degrees for comfort in the drops and control on gnarly terrain or long gravel assaults. It's time to take the road less traveled with EA50 AX. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 325g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Flare: 16-degrees - Reach: 80mm - Drop: 120mm - Materials: EA50 alloy
Salsa Cowbell
$50.00
The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 6061-T6 aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 314g (44cm)
Salsa Cowchipper
$50.00
The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 6061-T6 aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 322g (44cm)
Salsa Woodchipper
$50.00
Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 6061-T6 aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 357g (44cm)
Velo Orange Far Bar Handlebar
$54.00
For all the off-road drop bar fans, Velo Orange offers the Far Bar, an affordable off-road drop bar. With off-road drop bars, most riders have the bars set up at the same height as they would have flat bars set to. Most of the time you are riding, your hands are on the hoods of the brake levers. Then, for steep descents, put your butt back behind the saddle and use the drops to get a better grip on the brake levers. You can run brifters or standard road brake levers on them and use bar end shifters as well. The Daija Cycleworks crest appears on each side of the 31.8 mm clamp area. These bars are a little different then road bars in terms of measuring the width. The listed width - 44cm or 48 cm - is measured center of the drops to centre of the hoods. The overall width is 585mm for the 44cm size, 625mm for the 48cm size. - Weight: 292g - Drop: 110mm - Drop Bend Style: Compact - Reach: 76mm - Material: Aluminum - Bar Top Style: Round
Specialized Hover Alloy Handlebars – 15mm Rise plus Flare
$55.00
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. For added stability we've added 12 degrees of flare at the drop to give that wide stance. - Constructed from 6061 Butted Aluminum for a high-strength design. - 15mm rise provides a wider range of fit. - Shallow Bend Drop: 103mm drop x 70mm reach x 12d flare
Zipp Service Course 70 Ergo Handlebar
$55.00
Zipp's Service Course lineup provides options to match every rider with a high-performance, precise fitting bar. The Service Course 70 Ergo packs a powerful punch of everything you'd want in a bar — a design based on feedback from pro bike fitters and riders, an ergonomic top section, and a price you'll love. - 6061 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - Clip-on Compatible - ISO 4210 compliant. See Declaration of Conformity for details.
Zipp Service Course 70 Ergo Handlebars
$55.00
Zipp’s Service Course 70 Ergo bars ensure comfort and control for every hand position, thanks to their ergonomic flat tops and easy-to-reach drops. A short reach and the revised ramp angle make the drops more accessible and comfortable. This lets you get low and aero without compromising comfort or control. Stiff for uncompromising strength, these aluminum bars are ready for anything.
Zipp Service Course 80 Ergo Handlebar
$55.00
Zipp's stalwart Service Course 80 handlebars now have an option for those who prefer an ergonomic flat top. The new Service Course 80 Ergo retain the same 80mm reach and 125mm drop of the existing Service Course 80 bars, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. New is the flattened bar top and a 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course 80 Ergo are Zipp's first ergo bars to be clip-on compatible. The Service Course 80 Ergo bar uses 6061 aluminum to tip the scales at 315g for a 42cm-wide bar and comes in a Bead Blast Black finish. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - 6061 aluminum for light weight and durability - 80mm reach and 125mm drop for a medium-high position - Flattened top shape to better fit the hand - Clip-on Compatible - Di2 RS910 junction compatible - ISO 4210 compliant. See Declaration of Conformity for details. - Flat transition to hoods - Short reach to brake levers - 3° backsweep for wrist comfort - Anatomic drop shape - Flattened top shape to better fit the hand
Zipp Service Course 80 Handlebars
$55.00
Position versatility makes Zipp’s Service Course 80 bars an instant favorite. The drops are kept close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff for uncompromising strength, these aluminum bars are ready for anything.
Profile Design DRiVe Drop Bar
$57.99
Profile Design's DRiVe handlebars use the latest in ergonometric design to offer progressively sized handlebars built around a cyclist's most powerful hand positions. A long-radius transition to the hood position distributes pressure evenly across a rider's palm and provides clearance for their arm when they're sprinting in the drops. Short reach and flat transitions perfectly suit modern frame geometries and create a comfortable cruising position on top of the handlebars. The gradual, dual-radius drop eliminates sharp angles and ensures that riders can reach the brake and shift levers while they're in the drops.
Nitto Mod 177 Noodle Bar
$59.90
- Road/Touring/Cross bar with a unique slight backward sweep on the tops - Flat area behind the lever position prevents hands from sliding forward - 4 degree flared drops (width does not include the flares). No grooves - 335-345g: all Nitto bars are measured center to center - 140mm drop - 96mm reach
FSA Gossamer New Ergo Road Handlebar
$69.99
Upgrade your ride with FSA's Gossamer New Ergo Road Handlebar. Double-butted and shot-peened aluminum construction makes this bar light and durable. Plus, it features an anatomical shape for a great fit and feel, while built-in grooves make for easy cable routing.
Salsa Cowbell 2 Bar
$75.00
Salsa's Cowbell 2 Bar offers a flat transition from bar to lever, therefore increasing comfort. It's made from double-butted 7050 aluminum for sprinting stiffness at a decent weight. The unique feature of this handlebar are the 12-degree flared drops—perfect for cyclocrossers and people who like the extra room to really torque the drops on a sprint or climb.
Salsa Cowbell Deluxe
$75.00
The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 7050-T6 series aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 281g (44cm)
Salsa Cowchipper Deluxe
$75.00
The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 7050-T6 series aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 293g (44cm)
Page 1 of 4 Next page